top of page

Flo Brush Not Dispensing Serum Properly? Application, Cleaning and Troubleshooting Guide

11 minutes ago
9 min read

Why serum sometimes remains in your Flo Brush, what affects its flow and how to maintain your applicator when using personalised hair loss treatments.

The Flo Brush is designed to make applying topical hair loss treatments to the scalp easier and more convenient. However, if you have been using one regularly, you may have noticed that the serum does not always flow as expected.

One question I have received from patients is:

“I put 1 mL of serum into my Flo Brush, but there is still liquid left after the five-minute cycle. Is this normal, and how should I clean the brush?”

It is a reasonable question, particularly when you are using a prescribed hair loss treatment and want to make sure you are applying the correct dose.

Having used the Flo Brush myself with different personalised formulations, I have experienced similar issues. I have also identified a few practical steps that can help maintain a more consistent flow.

What is particularly interesting is that the problem is not always the brush itself. Sometimes, it is the formulation inside it.


How Does the Flo Brush Work?

The Flo Brush by Bloome is a rechargeable scalp applicator designed to help distribute topical serums whilst incorporating additional scalp treatment features.

These include red light technology, microcurrent stimulation, gentle warmth and scalp massage.

The device operates in five-minute treatment cycles and uses a refillable pod to deliver serum through the applicator head.

For my patients at GrowBack, its main attraction is the ability to apply personalised topical hair loss treatments directly to the scalp rather than relying entirely on a dropper or fingers.

This is particularly useful for patients with longer or thicker hair, where getting a serum onto the scalp rather than the hair itself can sometimes be challenging.

However, the Flo Brush is an application device, and its ability to dispense a formulation consistently depends partly on the physical properties of the liquid being used.


Why Is There Still Serum Left After Five Minutes?

If you have filled your Flo Brush with 1 mL of serum and some remains after the five-minute cycle, it does not necessarily mean the device is faulty.

The five-minute timer determines how long the device operates. It does not guarantee that every formulation will dispense completely within that period.

From my experience, there are three main factors worth considering.

1. Your serum may be thicker than other formulations

Not all personalised hair loss serums have the same consistency.

Some formulations are relatively thin and flow easily, whereas others are thicker because of their ingredients or the liquid vehicle used to carry them.

This is known as viscosity, which simply describes how easily a liquid flows.

A thicker serum may travel more slowly through the Flo Brush's narrow dispensing pathways.

This means two people using exactly the same device may experience different dispensing rates because their serums have different viscosities.

A formulation that flows freely through a dropper may not necessarily behave in the same way through a brush applicator.

2. Some personalised serums contain suspended particles

This is something I have particularly noticed when using the Flo Brush with certain compounded formulations.

Personalised hair loss treatments can contain several active ingredients. Depending on their solubility and the formulation vehicle, some ingredients may remain as very fine suspended particles rather than dissolving completely.

When particles remain dispersed within a liquid, the preparation is known as a suspension.

Over time, these particles may settle towards the bottom of the container. This is called sedimentation.

When a suspension passes through the Flo Brush, particles may accumulate around the dispensing outlets or within the mechanism, potentially restricting the flow of serum.

I have found this to be more noticeable with some formulations than others.

The likelihood of this happening depends on several factors, including the size and concentration of the particles, the viscosity of the formulation and how the applicator delivers the liquid.

An important point: Not every personalised serum should contain visible particles. If your formulation develops unexpected sediment, crystals or changes in appearance, contact your prescribing pharmacist before continuing to use it.

Do not assume that sediment is normal simply because your treatment has been compounded.

3. Pressure may build up inside the serum pod

Another observation I have made is that the serum occasionally stops flowing even when there is still liquid in the pod and no obvious blockage.

One possible explanation is a pressure difference developing within the reservoir as the liquid is dispensed.

In a container that is insufficiently vented, a partial vacuum can develop as liquid leaves, making it increasingly difficult for more liquid to flow.

I have occasionally found that releasing the pod and briefly opening its cap appears to restore the flow.

This may allow the pressure inside the reservoir to equalise, although I cannot confirm that this is the precise mechanism responsible.

It is an observation from using the device rather than a manufacturer-validated troubleshooting procedure.

I would not recommend routinely opening the pod during operation. Always switch the device off first, and only remove or open components in accordance with the manufacturer's instructions.


Why Regular Cleaning Makes Such a Difference

One of the most useful things I have learnt from using the Flo Brush is the importance of cleaning it regularly.

Even when a serum appears to be flowing normally, small amounts of formulation can remain around the dispensing outlets and bristles after application.

As the liquid dries, residue may accumulate.

This is particularly relevant to formulations containing suspended particles or ingredients that can crystallise as the vehicle evaporates.

Over repeated applications, this residue may gradually restrict the movement of serum.

I have personally found that regular rinsing of suitable detachable components after application helps maintain the flow.

However, it is important to distinguish between my experience and the manufacturer's cleaning instructions.

The Flo Brush contains electronic components and should not be immersed in water. Before rinsing any detachable part, confirm that the manufacturer specifically permits it.


How I Recommend Cleaning Your Flo Brush

The Flo Brush comes with cleaning accessories, including a cloth and brush.

For routine maintenance, I recommend the following approach:

  1. Switch the device off. Always clean the applicator when it is not operating.

  2. Remove surface residue. Use a clean, slightly damp, lint-free cloth to gently wipe the accessible applicator surfaces.

  3. Clean around the bristles. Use the supplied cleaning brush to remove visible deposits without applying excessive pressure.

  4. Inspect the dispensing outlets. Look for any residue that may be obstructing the movement of serum.

  5. Check the detachable pod. Clean it according to the manufacturer's instructions, taking particular care if your formulation contains suspended particles.

  6. Allow components to dry appropriately. Follow the manufacturer's instructions before reassembling or storing the device.

Do not submerge the electronic body, expose the charging port to water or insert needles or other sharp objects into the dispensing outlets.

A damp cloth may be sufficient for removing surface residue, but it may not clear deposits that have accumulated inside the dispensing pathway.

If the flow remains restricted after cleaning, contact the manufacturer or your prescribing pharmacist rather than attempting to dismantle the mechanism.


What Should You Do if Serum Stops Flowing?

If you notice that the Flo Brush is no longer dispensing properly, there are several things worth checking.

First, check how much serum remains.

Do not assume that the entire dose has been delivered simply because the five-minute cycle has finished.

Next, look for visible residue.

Inspect the bristles and dispensing outlets for dried formulation or accumulated particles.

Check that the pod is correctly fitted.

A pod that is not seated properly may interfere with normal operation.

Consider the formulation itself.

If your serum is particularly thick or contains visible particles, this may explain why the flow is slower or less consistent.

Finally, consider whether pressure is affecting the flow.

As mentioned earlier, I have occasionally found that carefully releasing the pod and opening its cap restores dispensing. However, this should not be treated as an approved maintenance procedure unless confirmed by Bloome.

If the problem continues, do not force the mechanism or modify the device.


Should You Shake Your Serum Before Using the Flo Brush?

This depends on how your personalised serum has been formulated.

Some preparations are designed as suspensions and require gentle shaking before application to redistribute settled particles.

Other formulations are intended to be clear solutions and should not contain visible sediment.

For this reason, I recommend following the instructions provided with your prescribed serum.

If your dispensing label says shake well before use, follow that instruction.

If it does not, and you notice particles collecting at the bottom of the bottle, ask your prescribing pharmacist to check the formulation.

Never add water, alcohol or another liquid to make your serum flow more easily.

Doing so could alter the stability, concentration or performance of your prescribed treatment.


Can You Use the Flo Brush for Longer Than Five Minutes?

The Flo Brush operates in five-minute cycles, but the amount of serum dispensed during a cycle may vary.

If you are prescribed 1 mL of topical treatment and some remains in the pod after five minutes, the important question is whether the prescribed volume has actually reached your scalp.

The amount remaining in the pod may include liquid retained within the applicator mechanism, so visual inspection alone cannot reliably establish the exact amount delivered.

Where permitted by the manufacturer's instructions and your treatment plan, an additional cycle may sometimes be appropriate to help dispense the remaining prescribed dose.

However, do not automatically add another 1 mL or repeat your medication dose because the first cycle has finished.

If you regularly find that your prescribed volume cannot be dispensed, discuss the application method with your prescriber.

In some cases, a calibrated dropper may be a more reliable way to administer the prescribed volume.


Does the Flo Brush Make Hair Loss Treatments More Effective?

The Flo Brush incorporates several technologies, including red light, microcurrent, warming and massage.

There is clinical evidence supporting certain forms of low-level light therapy in androgenetic alopecia, although outcomes depend on the specific device, treatment parameters and patient characteristics (Adil and Godwin, 2017).

It is important not to assume that every red light device produces the same results.

Similarly, there is insufficient independent clinical evidence to conclude that the Flo Brush itself improves the absorption or clinical effectiveness of all compounded topical hair loss medications.

For me, the main benefit is practical.

A dedicated scalp applicator may make it easier to distribute serum onto the scalp, particularly in areas where hair makes conventional application more difficult.

It may also make the application process more convenient for patients who struggle with using a dropper.

However, improved convenience should not be confused with proven improvements in drug delivery or hair growth outcomes.

The effectiveness of your treatment still depends on the diagnosis, prescribed medication, formulation, correct dose and consistent use.


Are All Personalised Hair Loss Serums Suitable for the Flo Brush?

Not necessarily.

At GrowBack, personalised formulations are selected according to individual clinical requirements.

Different formulations may contain different active ingredients, concentrations and vehicles.

Some may be relatively thin solutions. Others may have a higher viscosity or contain suspended particles.

These differences can influence how well a serum passes through a dispensing mechanism.

When considering whether the Flo Brush is suitable, I look at the formulation's physical properties as well as the patient's ability to use the device reliably.

The important considerations include viscosity, solubility, sedimentation, potential crystallisation and whether the prescribed dose can be delivered consistently.

A formulation should not be diluted or otherwise modified simply to make it compatible with the applicator.

Where reliable dispensing cannot be achieved, an alternative application method may be more appropriate.


My Five Practical Tips for Using the Flo Brush

Having used the Flo Brush myself, these are the points I would emphasise to patients:

  1. Clean it after every application. Removing residue before it dries may help prevent the dispensing outlets becoming obstructed.

  2. Understand your formulation. Thicker serums and those containing suspended particles may flow differently from thin solutions.

  3. Do not assume five minutes means an empty pod. Check whether your prescribed dose has been delivered.

  4. Pay attention to changes in flow. If the device suddenly stops dispensing, check for residue, pod positioning or possible formulation-related problems.

  5. Ask for advice if the problem continues. Do not dilute your serum, force the mechanism or increase your prescribed dose to compensate.


My Final Thoughts

I recommend the Flo Brush as a useful application option for suitable patients using personalised topical hair loss treatments.

However, having used it myself, I recognise that it is not always as simple as filling the pod, switching it on and expecting every drop to be dispensed within five minutes.

The formulation matters.

Its viscosity, the presence of suspended particles and the potential for residue accumulation can all influence how consistently the serum flows.

I have also observed that pressure changes within the pod may contribute to interrupted dispensing, although this requires confirmation from the manufacturer.

For me, regular cleaning has made a noticeable difference, particularly when using formulations that leave more residue.

The most important consideration is not whether the Flo Brush completes its five-minute cycle. It is whether your prescribed treatment is being applied correctly and consistently.

At GrowBack, personalised treatment extends beyond choosing the active ingredients. It also involves making sure that patients have an application method that is practical, suitable for their formulation and reliable enough for regular use.

If you are experiencing problems with your Flo Brush or personalised hair loss serum, please contact us before changing your application routine.

Because prescribing the right treatment is only part of the process. Applying it correctly matters too.


Sunil KochharIndependent Prescribing Pharmacist | Trichology SpecialistGrowBack | Personalised Hair Loss Treatments

References

Adil, A. and Godwin, M. (2017) 'The effectiveness of treatments for androgenetic alopecia: a systematic review and meta-analysis', Journal of the American Academy of Dermatology, 77(1), pp. 136–141.e5. https://doi.org/10.1016/j.jaad.2017.02.054.

Bloome (n.d.) Flo Brush: Product information. Available at: https://bloomelab.com/products/flo-brush (Accessed: 15 November 2026).

Suchonwanit, P., Thammarucha, S. and Leerunyakul, K. (2019) 'Minoxidil and its use in hair disorders: a review', Drug Design, Development and Therapy, 13, pp. 2777–2786. https://doi.org/10.2147/DDDT.S214907.

Clinical disclosure: Observations about formulation sedimentation, cleaning frequency and possible pressure-related flow interruption are based on practical experience with the Flo Brush. They have not been established through formal device compatibility or dispensing accuracy studies.

 
 
 

Comments


bottom of page